E-mail Us

APN SETTINGS For Travel SIM CARD(Unlimited Data)

To use 3G/4G internet with SIM cards, you need to set Access Point Name (APN) on your devices. General instruction is below. APN setup procedures slightly differ depending on your models of phone or phone companies. For android phones and your own pocket WiFi devices, we suggest to double-check APN setup procedures with your phone company. For iOS devices, you can simply install APN profile as described below. Having any questions? Feel free to contact us or talk to us.

APN SET UP PROCEDURES (This setting is needed for Data transfer)

  • For iPhone
    ※If you were asked for the SIM card PIN code, the initial value is ‘‘0000’’ . ※The phone MUST be restarted after all the settings has been done. However, the first time connect to our server may not be available from 10P.M.Tuesday‒9A.M.Wednesday due to our system maintenance. Please start SIM card setting process after the above time.
    1. Go to “settings” and Press “Cellular” to proceed.
    2. Select Cellular Data Network.
    3. Edit APN Values according to instruction for all 3 sections. Make sure all APN values are entered in small letter.
    4. Check the values and restart your phone.
    APN ppsim.jp
    Username pp@sim
    Password jpn
    ※APN values are entered in small letter ( in 3 sections)
  • For Android Phone
    ※If you were asked for the SIM card PIN code, the initial value is ‘‘0000’’ . ※The phone MUST be restarted after all the settings has been done. However, the first time connect to our server may not be available from 10P.M.Tuesday‒9A.M.Wednesday due to our system maintenance. Please start SIM card setting process after the above time.
    1. From Settings, select Network &Internet and check the Airplane mode is OFF.
    2. Select Mobile Networks.
    3. Select Access Point Name.
    4. Create New APN.
    5. Edit APN Values according to instructions. Make sure all APN values are entered in small letter.
    6. Save APN.
    7. Select newly created APN, and restart your phone. When connected, 3G/H+/LTE icon and Signal Bar will be displayed.
    Name ppsim
    APN ppsim.jp
    Username pp@sim
    Password jpn
    Authentication type PAP or CHAP
    NOTE
    1. APN values are entered in small letter ( in 3 sections)
    2. Auth. type is set to “PAP or CHAP”. if it is not available, please try each auth type (CHAP only and PAP only).
  • Your own Router
    The router MUST be restarted after all the settings has been done. However, the first time connect to our server may not be available from 10P.M.Tuesday‒9 A.M.Wednesday due to our system maintenance. Please start SIM card setting process after the above time. Please enter the following value to complete the setting. For a complete instruction , please refer to your device’ s manual or contact manufacturer.
    APN ppsim.jp
    Username pp@sim
    Password jpn
    Authentication type PAP or CHAP
    NOTE
    1. APN values are entered in small letter ( in 3 sections)
    2. Auth. type is set to “PAP or CHAP”. if it is not available, please try each auth type (CHAP only and PAP only).